WMD-05S automatic doors are predestined for the organization of VIP entrance, wheelchair entrance, transport of bulky goods, etc.

The door is provided with the possibility to install swing doors of various lengths (650 mm, 900 mm or 1100 mm). The length of the door leaf is chosen at the time of order. A new drive with a high-frequency position sensor (encoder) is used in the construction of the door. Accurate definition of the door leaf position ensures synchronous operation of a control signal from two doors installed together.

The Fire Alarm emergency release input enables connection of an external system to the control system from which the door will be released for free passage in both directions.

The door control is possible both in stand-alone mode from the control panel or a radio control device, as well as within the access control system.

The door opens wide automatically in the direction of the passage allowed by the signal from optical sensors, access control system or control panel. After a person has passed through, the door leaf automatically returns to its initial position. For the transport of bulky goods and the passage of wheelchairs, the door leaf is fixed in the open position.

When the mains power supply is disconnected, the back-up power supply unit in the control block ensures regular operation of the door for 1.5 h (or 1200 steps).

The door is a normally closed installation (when all power supplies are switched off, the closed door remains closed).

The door has a recessed mechanical release lock that allows, if necessary, to unlock the door with the help of the key - the door leaf can be turned in any direction and left in the open position. If necessary, the gates can be completed with barriers made in unique designs with them.

Main market segments to which the product is addressed:

- Banks and insurance companies.
- Government and institutional buildings.
- Office buildings, social headquarters, administrative headquarters.
- Schools, universities and colleges.
- Sensitive areas: military, nuclear, pharmaceutical, computing centers.
- Airports.

Power supply of the control unit:

• from the AC mains
• from external power supply

220V/50Hz
24V DC Functional voltage supplied to the door stand24V DC Traffic capacity in single passage mode12 man/min External dimensions of the door (height×width×depth):

• with 650 mm swing
• with 900 mm swing
• with 1100 mm swing

1012×773×145 mm
1012×1023×145 mm
1012×1233×145 mmWidth of the passage area:

• with 650 mm door leaf
• with 900 mm swing
• with 1100 mm swing

700 mm
950 mm
1150 mmFunctional temperature range:

• of the door
• of the control panel

from +1°C to +55°C
from +1°C to +40°C

The semi-automatic WHD-05 posts are predestined for the organization of unilateral free passage and prohibition of opposite passage.

The frame of the gate opens by hand when passing through, after passing through it returns to its starting position. The smoothness of rotation is achieved thanks to the presence of the hydraulic damping device. The elongated frame allows organizing the passage of wheelchairs, as well as an additional evacuation exit in case of emergency. The electromechanical pole can operate independently from the control panel and within the access control system. The LED module for indication of the pole status is fixed in the pole column.

The access control can be carried out in both directions or only in one direction. There is a possibility of blocking one of the access directions by means of a removable mechanical limiter included in the standard delivery set. The built-in power supply ensures the possibility of the pole operation in case of power failure. The WHD-05 electromechanical pole is a normally open device. When the power supply is cut off, the pole frame is unlocked, free passage is possible in both directions. The pole is intended for use indoors.

Main market segments targeted by the product:

- Banks and insurance companies.
- Government and institutional buildings.
- Office buildings, social and administrative headquarters.
- Schools, universities and colleges.
- Sensitive areas: military, nuclear, pharmaceutical, computing centers.
- Airports.

Power supply voltage12 VP Power consumption (max)14 WC Traffic capacity in single-pass mode:
Standard frame 650 mm
Extended frame 900 mm
22 pers./min
20 pers./minOuter dimensions of the pole (height×width×depth):
Standard frame 650 mm
Extended frame 900 mm
1040×780×160 mm
1040×1030×160 mmWidth of passage area:
Standard frame 650 mm
Extended frame 900 mm
700 mm
950 mmTemperature range from +1°C to +45°C

Intended for intra-building sites, the SL 930 is designed to facilitate the passage of persons with reduced mobility (wheelchair users, maintenance personnel with trolleys, bulky equipment, etc.), as well as the evacuation of the building in case of emergency.

Its discreet design provides access control at prestigious entrances.

With a bi-directional gate, the obstacle opens in the user's direction of travel.

The obstacle is mechanically locked in closed position.

Possible configurations:

- Alone, in front of a wall or a railing.

- In front (independent operation)

- Opposite (simultaneous operation)

- In battery with through safety passageways, tripod turnstiles or low glazed drums.

1. Self-supporting steel chassis treated against corrosion with epoxy paint, fixed to the floor by means of an adjustable fixing ring for easy leveling.

2. 10 mm thick clear tempered monolithic glass obstacle to the passage.

3. Body made of brushed AISI 304 stainless steel sheets, folded and welded, ensuring easy access to the electromechanical assembly and the control logic.

Control electronics and transmission unit, consisting of a geared motor, a frequency inverter and a pulse encoder. The set allows to obtain permanent information about the position of the crystal and a suitable reaction through the control electronics.

Command logic with LCD display and pushbuttons for obstacle movement configuration and functional tests.

Main market segments targeted by the product:

- Banks and insurance companies.
- Governmental and institutional facilities.
- Office buildings, social headquarters, administrative headquarters.
- Schools, universities and colleges.
- Sensitive areas: military, nuclear, pharmaceutical, computing centers.
- Airports.

- Power supply: 230V AC single-phase, 50Hz (do not connect to an isolated grounded network or to a grounded industrial distribution network with high impedance).

- Nominal power consumption: 200 W.

- Ambient operating temperature: -20(*) to +60°C (*) due to the heat emitted by the internal equipment connected).

- RH: < 90%, without condensation.

- Closing position adjustable to 360°.

- Opening angle: adjustable from 90 to 120°.

- Minimum opening time (adjustable): 2.5 s.

- Closing time = opening time.

- Opening time: adjustable from 2.5 to 10 s.

- Obstacle holding time in open position: adjustable between 0 and 100 s.

- Weight (obstacle included): between 81 and 86 kg, depending on obstacle height.

- MCBF (mean number of cycles between failures), respecting the recommended maintenance: 1,000,000 cycles.

- IP 51.

- Conforms to CE standards.

- Certified D.A.S (Safety Actuated Device), in conformity with the French standard NF S 61-937 on fire protection.

Intended for intra-building sites, the SL 931 is designed to facilitate the passage of persons with reduced mobility (wheelchair users, maintenance personnel with trolleys, bulky equipment, etc.), as well as the evacuation of the building in case of emergency.

The SL 931 is distinguished from the SL 930 by the larger size of the chassis, which allows the attachment of higher obstacles.

Its unobtrusive design provides access control at prestigious entrances.

With a bi-directional gate, the obstacle opens in the direction of travel of the user.

The obstacle is mechanically locked in the closed position.

Possible configurations:

- Alone, in front of a wall or a railing.

- In front (independent operation)

- Opposite (simultaneous operation)

- In battery with through safety passageways, tripod turnstiles or low glazed drums.

1. Self-supporting steel chassis treated against corrosion with epoxy paint, fixed to the floor by means of an adjustable fixing ring for easy leveling.

2. 10 mm thick clear tempered monolithic glassobstacle to the passage.

3. Body made of brushed AISI 304 stainless steel sheets, folded and welded, ensuring easy access to the electromechanical assembly and the control logic.

Control electronics and transmission unit, consisting of a geared motor, a frequency inverter and a pulse encoder. The set allows to obtain permanent information about the position of the crystal and a suitable reaction through the control electronics.

Command logic with LCD display and pushbuttons for obstacle movement configuration and functional tests.

Main market segments targeted by the product:

- Banks and insurance companies.
- Governmental and institutional facilities.
- Office buildings, social headquarters, administrative headquarters.
- Schools, universities and colleges.
- Sensitive areas: military, nuclear, pharmaceutical, computing centers.
- Airports.

- Power supply: 230V AC single-phase, 50Hz (do not connect to an isolated grounded network or to a grounded industrial distribution network with high impedance).

- Nominal power consumption: 200 W.

- Ambient operating temperature: -20(*) to +60°C (*) due to the heat emitted by the internal equipment connected).

- RH: < 90%, without condensation.

- Closing position adjustable to 360°.

- Opening angle: adjustable between 90 and 120°.

- Minimum opening time (adjustable): 2.5 s.

- Closing time = opening time.

- Obstacle holding time in open position: adjustable between 0 and 100 s.

- Weight (obstacle included): between 100 and 120 kg, depending on obstacle height.

- MCBF (mean number of cycles between failures), respecting the recommended maintenance: 1,000,000 cycles.

- IP 51.

- Conforms to CE standards.

- Certified D.A.S (Safety Actuated Device), in conformity with the French standard NF S 61-937 on fire protection.

An ideal complement to the SmartLane range of safety corridors, SmartLane 935 swing doors allow easy evacuation of buildings in case of emergency and provide a wider path for people with reduced mobility (PRM).

1. Self-supporting galvanized steel frame.

2. 304L stainless steel bracket, #4 finish.

3. Removable side panels with key lock.

4. Top cover with black laminate.

5. Pivoting obstacle made of 12 mm thick clear tempered glass.

6. Electromechanical unit consisting of:

• Three-phase asynchronous motor with an electromagnetic brake.
• Secondary transmission with crank and rod linkage ensuring perfect mechanical locking in both extreme positions.
• A variable speed controller that guarantees progressive adjustable accelerations and decelerations for vibration-free movement and greater user safety.
• A device to automatically open the movable glass obstacle in case of a power failure (standard version opens in exit direction).

7. Bright pictograms:

• Operating pictogram, inside the cover plate, indicating the procedure to be followed.
• Focus display, on the housing, indicating the status of the equipment.

8. Presence detection photoelectric cells, ensuring safe passage.

If the SmartLane 935 is not installed on the battery, a reflective strip must be installed on the opposite wall (available as an option).

Main market segments targeted by the product:

- Banks and insurance companies.
- Government and institutional facilities.
- Office buildings, social headquarters, administrative headquarters.
- Schools, universities and colleges.
- Sensitive areas: military, nuclear, pharmaceutical, computing centers.
- Airports.